Basic Discussion Conference System YC813
YC813M Central Controller Unit
YC813 is a multifunctional conference central unit,which centralized processing and control discussion,Clear soundhi-fidelity, Bulld in mute
function, can connect 60 units,through extend powercan connect120 units. It supports for multiple meeting modes.
● Adopting digital audio,hi-fidelityBuild in mute functionand easily to setting.
● Capable of telephones connection for remote teleconference.
● LCD display for status information and configuration.
● The CU has Three trunk outputs for the loop-throughconnection of contribution units.The CUcanconnect60 units and
● possible to connect 30 contribution units to each trunk output.
● Up to 120 Contribution units by add Central control forextension connection of conference units.
● Four operational microphone modes:
1.Limited mode: allows selection microphoneswhich can be simultaneously active.(1/3/6)
2.FIFO mode: delegates can override each other simply by activating their microphones.(1/3/6)
3. Chairman only mode: only chairman can speak.
4. Free mode: The entire unit can be activated.
● Number of open microphones between 1 or 3or6(Limitand FIFO mode)and Infinity(Free mode).
Features
● Adopting digital audio,hi-fidelity Build in mute function and easily to setting.
● Capable of telephones connection for remote teleconferencing.
● Built-in rack mount kit easy to to store and installed in a standard 19inches rack.
● LCD display for status information and configuration.
● The CU has Three trunk outputs for theloop-through connection ofcontribution units.The CU can connect 60 units and
● possible to connect 30 contribution units to each trunk output.
● Up to 120 Contribution units by add Central control for extension connection of conference units.
● Four operational microphone modes:
● 1.Limited mode: allows selection of one or three or six microphones(excluded chairmen microphones)which can be simultaneously active.
2.FIFO mode: delegates can override each other simply by activating their microphones.(Note: In FIFO modedelegates cannot override chairman)
allows selection of one or three or sixmicrophones(excluded chairmenmicrophones) which can be simultaneously active.
3.Chairman only mode: only chairman can speak.Delegate microphones cannot be activatedeven when a chairman is not speaking.
4. Free mode: The entire unit can be activated.
● Number of open microphones between 1 or 3 or 6 (Limitand FIFO mode) and Infinity (Free mode).
Controls and Indicators
Front
Power on/off switch.
LCD display for status information and configuration.
1 button (MODE) for select config conference mode.
1 button (^) for setting in conference mode.
1 button (v) for setting in conference mode.
Interconnections
Back
One three-pole XLR balanced audio line output.
1 x Cinch connector pair,Rec output or Aux output.
1 x Cinch connector pair,Line input or Aux input.
3 x Circular din connectors 8P DIN panel female for loop through interconnection.
1 x Circular din connectors 8P DIN panel female for extension connection of conference units.
1 x AC input.
Specifications
Power Supply:AC220V-50HZ
Max Power Consumption:120W
Frequency response:100Hz-14kHz
Input/Output:8P-DIN
Input:MIC 6.3mm RCA
Output:XLRM(Balance)RCA
Color:Dark Gray
Diamensions:480x325x85mm
Weight:9.5 Kg
Interconnections
Back
Power portAC220V/50Hz orAC110V/60Hz.
8P conference microphone unit input for 4 group connector.
XLR OUTBalanced voice output to connectCONSOLEMIXERFEEDBACK and so on.
LINE OUT RCA,moon line output toconnect MIXERCONSOLERECORDER.
LINE IN RCA,moon line inputs to connect CD/MP3/computer and so on.
YC813 series is a new desktop discussion unit which includes a chairman unit(YC813C)and delegate unit(YC813D).
Chairman unit has priority of the whole meeting and can terminate or discontinue other delegate units who is speaking.
Features
Controls and Indicators
● Microphone on/off button.
● Chairman priority button, When pressed the chairman priority button causes all currently active delegate microphones to bepermanently muted.
● Rotary volume control for adjusting built-in loudspeaker volume or headphone volume(when headphone connect).Built-in loudspeaker and
pluggable microphone.
● The built-in loudspeaker, automatically muted when microphone is on or headphones are connected.
● Microphone has"no"indicator(red LED).
● Light ring indicator on microphone stem,lights up red when microphoneis on.
● Microphone button with a red or green illuminated ring LED.Green indicates microphone is active, red indicates reguest-to-speak not accepted.
Interconnections
1x 3.5 mm stereo jack type headphone sockets.
1x 3.5 mm mono jack type line in sockets.
2 m cable terminated within a circular din connectors 8P DIN cable plug.
Circular din connectors 8P DIN panel female for loop-through connections.
Specifications
Power Supply:DC24V supplied by the central unit
Power Consumption:40mA
Interface Type:8P-DIN
Earphone Output:3.5mm stereo jack
Installation:Desktop
Earphone Impedance:8 -32 0hm
Connection Mode:Daisy-Chain
Crosstalk Attenuation:>80 dB
Speaker Power:2w
Microphone Type:Condenser
Polar pattern:Ultra Cardioid
Frequency response:100hz-14kHz
Signal-to-Noise Ratio:>80 dB
Sensitivity:-47 dBV/Pa
Length of Microphone:420mm
Color:Silver/Gray Black
Diamensions:W200xH56xD130 mm
Weight:1.1Kg
YM80
Professional Conference Mixer Console
Overviews
The pro mixina console is key to a professional audio system.Using pre amplifier as the main part, it can receive multi-channel audio
signals of different impedances and levels and can equalizemixdistribute these sianals.As lona as you achieve the best SNRand timbre
through adjustmentthe pro mixing console will complete efficient and quality transmission of audio signals.
TechnicalSpecificationsoftheYM80YM120YM160
YM80: 4 channels Mono and 4 channels Mic input2channel stereo input
YM120:8 channels Mono and 8 channels Micinput2channel stereo input
YM160: 12channel Mono and 12 channels Micinput2 channel stereoinput
High-performance Microphone Pre amplifiers with Switchable Phantom Pow
3-band Channel EQand High-pass Filters
Built-in Channel Compressors
Smooth 60-millimeter Faders
&Illuminated Channel ON Switches
Bright Meters for Visual Level Monitoring
Specifications
Professional Conference Amplifier
Overviews
The pro amplifier has a built-in efficient transformer and hiah capacity filter power supply.This helps ensure lower distortion, greater
low frequency control force and clearer voice when the amplifier outputs at full load. The pro amplifier offers three output modes,including
stereo,mono and bridge output.The use of time delay relay circuit allows soft startwhich helps protect the speaker against electric
shock during POWER ON or OFF.The pro amplifier is widely used on many occasions for speech transmission and sound reinforcement.
Features
● High strength structural frame chassis,with symmetrical structurequick assembly
● High energy linear power supply,high efficiency transformer
● Modular structure,high resolutionclear and delicate
● Balanced,unbalanced input
● Stereo, mono,bridging three output modes
● High sensitivity of safety protection circuit
● Power supply, protection,signalclippingLED working status indication
● Peak amplitude,power limit of soft starting system.With character of soft start circuit machine relay delay, ruby
protecting speaker free
● Double Speaker and loudspeaker wiring column output
● High efficiency dual fan cooling channel
Specifications
Connection Diagram
Pictures of projects
Copyright © Yarmee Electronic Technology Co., Ltd. All Rights Reserved | Sitemap